Lampe Berger purifies and perfumes the air indoors like no other system. Catalytic diffusion, which has been perfected over the years, destroys the molecules responsible for undesirable odors.
How often do you use a Lampe Berger?
If you haven’t burned a Lampe Berger in your home before or at least in a few days you will need to burn your Lampe Berger 1 hour for every 600sq.ft.of home the first time, and then repeat every day after that for 30 minutes for up to 2000sq ft.homes and add 10 minutes for every 400sq ft.
Why won t my Lampe Berger stay lit?
First off, make sure that you are using only original Lampe Berger fragrance oils in your fragrance lamp. Provided that is the case, the reason your Lampe Berger burner will not stay lit is probably because the wick has soaked up too much fragrance oil and has become overly saturated.
Can you leave the Lampe Berger on all the time? No, it is not intended for that. Its period of use is a maximum of one minute per cubic metre, in other words 20 minutes’ use in a 20sqm (51.60ft2) room.
How long does Maison Berger lamp last?
In particular, it is important to only use Maison Berger Paris perfume in your Lampe Berger. This way, the burner can last for one year or 200 uses; remember to regularly renew it for optimal use of your Lampe Berger. Can fragrances other than those by Maison Berger Paris be used in a Lampe Berger?
Why does my fragrance lamp keep going out?
This is most probably because the stone/wick assembly has not been fitted into the Lamp correctly. If the collar of the stone/wick assembly is not fully inserted into your Lamp, the fragrance will slowly evaporate. This can also happen if the snuffer-cap is not fully pushed down to cover the stone.
How do you unclog a Lampe Berger wick?
follow the steps below:
Remove burner wick.
Fill your lamp 2/3 of SO NEUTRAL home fragrance.
Insert your burner wick back into your Lampe Berger and allow to soak for 20 mins.
Light your burner and allow to heat up for 2 minutes then blow out the flame.
How long should a Lampe Berger open flame be?
We find that about 1/2 full works best. Insert your catalytic burner and wick securely into your fragrance lamp. If this is your burner’s first use, let the wick soak up the fragrance oil for about 20 minutes before lighting your lamp. Light the catalytic burner and let the flame burn for about 2 minutes.
Here are the top reasons why a Lampe Berger is a smart thing to own. You can reduce and/or eliminate offensive odors in the air in as little as 20 minutes. You can reduce airborne viruses and bacteria~especially when guests are over~by burning the Lampe Berger. You can use Lampe Bergers for home decor.
Does Maison Berger purify the air?
The Lampe Berger is a unique ritual. The air is purified, perfumes, It only takes 30 minutes to purify a space of 50 square feet.
Do Berger lamps purify the air?
The primary benefit of the Lampe Berger is the disinfecting action of heating isopropul alcohol to purify the air by breaking down the impurities on a molecular level. The Lampe Berger destroys bacteria and foul odors and increases the oxygen level.
Can you use essential oils in a Lampe Berger?
Things You’ll Need
Although an effective home deodorizing device, the prepackaged Lampe Berger fragrance oils are very costly. These oils are, in fact, largely not oil, but rather simple rubbing alcohol with a few drops of essential oils. You can mix the oil yourself at a lower cost than the prepackaged oils.
How do you stop a Lampe Berger?
Blow the flame off the catalytic burner after 2-3 minutes.5.Let the fragrance diffuse for 30 -60 minutes. (Put the stopper on if you want to stop the lamp from diffusing.)
Can you use other oil in Lampe Berger?
A: Lampe Berger’s lamps only work with Lampe Berger Fragrances. Since the fragrances are alcohol based and not oil based, it’s difficult to find another alternative. Helpful?
Since isopropyl alcohol normally comes in 16 ounce bottles*, getting the amount you need is generally pretty simple. Using a disposable pipette, add roughly 20 drops of your fragrance oil to your bottle of isopropyl. By doing this, you will get the right proportions of both ingredients.
Does Lampe Berger oil expire?
A: No, the 100% pharmaceutical grade isopropyl alcohol that makes up 90% of the mixutre is stable.
How do you refill a Berger Lampe?
Using the small Lampe Berger funnel, slowly fill your lamp with the Lampe Berger fluid of your choice, taking care not to fill the lamp more than two thirds (2/3) full. Carefully re-insert the wick. If using the wick for the first time, let it soak for 20 minutes before lighting.
Can you put a scent in lamp oil?
Adding essential oils to lamp oil is not something new, but it is an excellent way to cosy up your home. The option to customise your place through aroma is one of the most delightful personal touches.
